Black Silicon Carbide Micro Powder

Fine Black SiC Powder for Precision Grinding, Lapping, Polishing, Ceramics & Industrial Formulations

FEPA · JIS · MICRON

Standard-led selection

PSD & TEST METHOD

Distribution evidence

APPLICATION INPUT

Process-matched review

LOT DOCUMENTS

Quotation-defined controls

Black Silicon Carbide Micro Powder

Silicon Carbide Micro Powder manufactures

FerrumX manufactures black silicon carbide and processes selected material into fine powders through crushing, milling and classification. The production route is matched to the required grade, particle-size distribution and application rather than sold by nominal micron size alone.

Unlike macro grits, micro powders are selected for fine grinding, lapping, polishing, ceramic formulations and other processes where median particle size, coarse-particle control, fines content and dispersion behavior directly affect the result.

HIGH HARDNESS

Fine abrasive cutting

Black SiC provides strong cutting action on hard, brittle and non-metallic materials.

CONTROLLED PSD

Distribution by standard

F, P, JIS or micron grades define different particle-size distributions and cannot be substituted by name alone.

THERMAL STABILITY

Heat-resistant SiC

High thermal conductivity and low expansion support abrasive, refractory and ceramic formulations.

Black Silicon Carbide Micro Powder Sizes

FerrumX supplies fine black SiC powders by FEPA, JIS or agreed micron specifications. State the grading system, exact grade, application and acceptance method on every enquiry so production and inspection can be matched to the order.

FEPA F

F230–F1200

Fine F-series powders for bonded abrasives, lapping, polishing and qualified industrial formulations.

FEPA P

P240–P1200

Fine P-series powders for coated abrasives and finishing products manufactured to the applicable P standard.

JIS

JIS fine grades

JIS designations are available for applications that purchase by the Japanese particle-size system. Confirm the exact edition and limits.

MICRON / CUSTOM

Defined D-values or sieve limits

Specify D10, D50, D90/D94, maximum particle size, test method and tolerance for application-specific powder.

Typical Properties of Black Silicon Carbide Mico

PropertyTypical ValueApplication Relevance
Chemical formulaSiCSilicon carbide base material.
Crystal formα-SiCStable high-temperature silicon carbide crystal.
ColorBlackAssociated with the industrial black SiC grade.
Mohs hardnessAbout 9.2–9.5Supports grinding, lapping and wear resistance.
True densityAbout 3.20–3.21 g/cm³Used for material identification and formulation calculations.
Thermal behaviorDissociates at about 2,500°CSiC does not melt conventionally at atmospheric pressure.
Thermal conductivityHighHelps transfer heat in abrasive and technical products.
Thermal expansionLowReduces dimensional change during temperature cycling.
Chemical behaviorGood chemical inertnessSupports refractory, ceramic and corrosion-resistant applications.

FEPA, JIS & Micron Powder Specifications

FEPA F

Bonded abrasive route

Use the complete F designation and standard for bonded abrasive, lapping and other qualified fine-powder products.

FEPA P

Coated abrasive route

Use the P designation for coated abrasive products. A similar F and P number does not define the same distribution.

JIS

Japanese grading route

Confirm the JIS standard edition, nominal grade and required distribution before quotation.

MICRON PSD

Instrument-defined route

State D10, D50, D90/D94, top cut, test instrument, dispersion medium and calculation basis.

Do not convert between F, P, JIS, mesh and micron values using a single nominal number. The full particle-size distribution, especially coarse particles and fines, controls surface defects, removal rate and dispersion.

Black Silicon Carbide Micro Powder Features

HARDNESS

Strong abrasive action

Fine black SiC cuts glass, stone, ceramics, hard alloys and other hard or brittle materials.

ABRASION RESISTANCE

Wear-resistant filler

Hard particles support qualified wear coatings, ceramic bodies and composite formulations.

THERMAL CONDUCTIVITY

Heat-transfer performance

Useful where a formulation requires thermally conductive, electrically functional or heat-stable particles.

LOW EXPANSION

Dimensional stability

Helps technical and refractory formulations withstand temperature changes.

CHEMICAL INERTNESS

Stable mineral phase

Supports selected refractory, ceramic, coating and environmental applications.

POWDER PROCESSABILITY

Dry or wet classification

Manufacturing routes can be selected to control particle distribution, surface cleanliness and dispersion behavior.

Black SiC Micro Powder Applications

Black silicon carbide micro powder is used as a fine abrasive, ceramic feedstock, refractory additive and functional mineral powder. The required purity and particle distribution change with the application.

BONDED ABRASIVES

Grinding wheels and stones

Fine F grades for bonded tools requiring controlled cutting action and surface finish.

COATED ABRASIVES

Paper, cloth and films

P-series powders for fine coated-abrasive products and finishing systems.

LAPPING & POLISHING

Loose abrasive processing

For lapping, pre-polishing and controlled surface finishing of glass, crystals, ceramics and hard materials.

REFRACTORIES

Fine matrix addition

Micro powder fills fine particle spaces and can support packing, wear resistance and thermal performance in qualified refractory formulations.

FOAM CERAMICS

Ceramic filter products

Selected SiC powders can enter porous and foam-ceramic bodies where chemistry, PSD and firing route are matched.

REACTION-SINTERED SiC

Fine formulation component

Micro powder contributes to particle packing and reaction-bonded ceramic processing together with coarser SiC fractions.

How to Select Black SiC Micro Powder

Start with the application result, then define the grading system and distribution. A finer nominal grade does not automatically produce a better result if coarse particles, agglomerates or excessive fines are uncontrolled.

REMOVAL RATE

Choose sufficient cutting size

Coarser micro powders remove material faster but normally produce a rougher finish.

SURFACE FINISH

Control coarse-particle tail

D3 or maximum-particle control helps reduce deep scratches and surface defects.

DISPERSION

Control fines and agglomeration

D50, D90/D94, moisture and powder preparation affect slurry, coating and ceramic mixing.

PROCESS COMPATIBILITY

Match bond, liquid or matrix

State the bond, backing, slurry chemistry, dispersant, resin or ceramic forming route.

Useful RFQ inputs include the current powder, workpiece, process equipment, removal target, roughness target, test method, sample quantity and failure mode being corrected.

Black SiC Micro Powder vs Green SiC Micro Powder

Selection FactorBlack SiC Micro PowderGreen SiC Micro Powder
Purity positionGeneral industrial purity gradesHigher-purity grade
Grain behaviorTougher and economicalSharper and more friable
Typical priorityBroad use, wear resistance and cost controlPrecision cutting, cleaner processing and lower contamination
Common routesAbrasives, refractories, ceramics, coatings and functional fillersPrecision abrasives, technical ceramics, optical and electronic materials
Commercial positionUsually more economicalUsually higher cost

Black SiC micro powder is often selected for versatile, cost-effective fine grinding and industrial formulations. Green SiC is considered when higher purity and sharper cutting have greater value to the process.

Black SiC Micro Powder Production & Quality Control

FerrumX controls black SiC production from selected crystal through deep processing, classification, batch inspection and packing. Micro powder performance depends on both the SiC feedstock and the processing route.

01 · CRYSTAL SELECTION

Choose the black SiC feedstock

Raw crystal is selected according to target chemistry and downstream application.

02 · CRUSHING & MILLING

Reduce particle size

Controlled crushing and milling reduce selected black SiC to the required fine-powder range.

03 · SHAPING

Adjust particle form

Particle form and coarse-particle control are adjusted where the application requires tighter cutting or dispersion behavior.

04 · CLASSIFICATION

Dry, wet or combined route

Dry, wet or combined classification may be used according to the agreed grade and distribution limits.

05 · CLEANING & DRYING

Control impurities and moisture

Cleaning, impurity control and drying prepare the powder for order-specific inspection.

06 · INSPECTION & PACKING

Verify the agreed specification

Batch testing can include chemistry by ICP-OES and particle-size testing by the laser method, together with order-specific checks before lot-controlled packing.

Specifications to Confirm Before Ordering

A complete micro-powder specification should identify the material, particle-size system, application and acceptance method.

CORE INPUT 01

Application and workpiece

State the material being processed or manufactured and the role of the powder.

CORE INPUT 02

Governing size system

State FEPA F, FEPA P, JIS or a micron-based PSD with the applicable standard.

CORE INPUT 03

Target particle distribution

Define D3 or top cut, D50, D90/D94, fines limit and measurement method.

CORE INPUT 04

Chemistry limits

Define minimum SiC and maximum Fe₂O₃, free carbon and other controlled impurities.

PROCESS INPUT 05

Physical characteristics

Add bulk density, moisture, grain shape, magnetic material or surface area when relevant.

PROCESS INPUT 06

Dispersion and cleanliness

State slurry medium, dispersant, contamination limit and agglomeration concerns.

DOCUMENT INPUT 07

Lot release records

List required COA fields, TDS, SDS, retained sample and inspection documents.

COMMERCIAL INPUT 08

Packing and delivery

Provide quantity, bag size, liner, pallet, marking, destination, Incoterm and schedule.

Packaging, Storage & Powder Handling

25 KG BAGS

Paper or woven plastic bags

Confirm inner liner, bag material, sealing method, label and pallet requirements.

CUSTOM PACKING

Packing matched to handling

Bag size, inner liner, pallet and bulk-handling requirements are confirmed by grade, order quantity and destination.

DRY STORAGE

Protect against moisture

Store sealed bags indoors and protect powder from moisture, dust and cross-contamination.

SAFE HANDLING

Control fine airborne dust

Use the applicable SDS, ventilation, dust collection and personal protection required by the workplace.

For export quotation, provide the destination port, Incoterm, order quantity, packaging, labeling language and required shipping or quality documents.

Why Choose FerrumX for Black SiC Micro Powder?

FerrumX operates two 40,000 KVA furnaces and five deep-processing lines within a 120,000 t/year SiC production system, supporting black SiC supply from crystal to fine powder.

FerrumX combines black SiC manufacturing with deep processing, batch testing and export supply. Buyers can align grade, particle distribution, packing and release documents with the actual production requirement.

Share the workpiece, slurry, bond, coating or ceramic route before confirming the powder.

Confirm packaging, marking, destination and required TDS, SDS or COA fields in one enquiry.

Confirm the coarse tail, median size, fines and test method. Batch release can include laser particle-size testing and ICP-OES chemistry testing as agreed.

Frequently Asked Questions

Direct answers to the most common questions about black silicon carbide — optimized for AI engine citation and quick reference.

Q1: What sizes are available?

Common fine ranges include FEPA F230–F1200 and P240–P1200, plus JIS and customer-defined micron distributions.

Q2: What is the difference between macro grit and micro powder?

Macro grits are coarser and typically sieve-controlled. Micro powders are finer and require tighter control of the complete particle-size distribution.

Q3: Can I convert an F grade directly to a micron value?

A nominal comparison is not enough. Confirm D-values, top cut, fines, governing standard and measurement method.

Q4: What do D3, D50 and D94 mean?

They identify different cumulative points in the particle-size distribution. Their interpretation must follow the agreed test method.

Q5: Which grade is best for lapping or polishing?

Selection depends on workpiece, starting surface, removal rate, target roughness, slurry and allowable scratch depth.

Q6: When should I use green SiC micro powder?

Consider green SiC when higher purity, sharper cutting or lower contamination is more important than the cost and toughness advantages of black SiC.

Q7: What data should be included on the COA?

Typical fields include lot identity, SiC content, controlled impurities and particle-size results. Add moisture, bulk density or magnetic material when required.

Q8: What information is needed for a quotation?

Send the grade or PSD, chemistry, application, test method, quantity, packaging, destination and delivery schedule.

Contact Now?
Send Us a Message.

Our team responds within 24 hours. For detailed quotes and samples, use the full inquiry form on our Contact page.

  • Product or grade - black or green SiC, purity and specification
  • Particle size - grit, grain, powder or required distribution
  • Order details -quantity, packaging and destination port
  • Application - refractories, metallurgy, abrasives or advanced ceramics
  • SiC samples available

    TDS, SDS & COA

    EXW,FOB, CFR & CIF

    By submitting, you agree to our Privacy Policy. We never share your data.